0733.645817
0733.645817 (orari negozio)
Codice: INKA SMART HC X A70 cod.305.0599.308 | Faber
4 items available to order.
Costi di spedizione in: Lithuania (Change Country) 28,28 €
INKA SMART HC X A52 Cod. 305.0554.546
Great ease of installation, maintenance, and attention to aesthetics for this built-in unit with superior performance, which can be mounted in any type of shell, even very thin ones.
Category built-in wall-mounted hoods or rustic hoods. The cut-out hole for its insertion should be approximately 67.7X26.1
Technical features
Finish Stainless steel (inox front)
Controls Electromechanical Slider
Lighting 2 Led HV 4000k
Aluminum filter
Width 702
Performance at 3 speeds
IEC point suction capacity 180-270-390
Pressure (PA) 220-240-260
Power consumption 80-90-110
Noise level dB(A) 54-62-70
Energy consumption B
Led spotlight that provides diffused light with a consumption of only 3 Watts
The hood can be used in recirculation mode, thus connected to external ducting, or in filtering mode.
In recirculation mode, the existing hole is a double fitting, with a diameter of 15 and 12 cm.
If you need ducting or reducers for smaller diameters, you can purchase them at the bottom of the listing.
If it is not possible to connect it to ducting, it can be used in filtering mode; in this case, you need to add 1 pair of activated carbon filters code 112.0556.527.
**NOT SUITABLE FOR INDUCTION HOB**
What are the required dimensions for the installation of the Faber INKA SMART HC X A70 hood?
The cut-out for the hood installation should be approximately 67.7 x 26.1 cm.
What are the available installation options for this hood?
The hood can be used in recirculation mode, connected to an external duct, or in filtering mode with the addition of activated carbon filters.
What are the main technical features of the hood?
The hood has a stainless steel finish, electromechanical slider controls, LED lighting, and an aluminum filter. It has a width of 702 mm.
What is the extraction capacity of the Faber INKA SMART HC X A70 hood?
The extraction capacity ranges from 180 to 390 m³/h, depending on the speed setting.
What are the noise levels of the hood during operation?
The noise level ranges from 54 to 70 dB(A) depending on the selected speed.
Copyright @ Af Interni Shop by Af Interni di Coppari Massimiliano e Simona & C. snc - P.IVA: 01582080436 - All Rights Reserved
Web Agency Informinds
